Similar articles

Abstract: Energy crisis make the effective use of low grade energy more and more urgent. It is still a worldwide difficult conundrum. To efficiently recover low grade heat, this paper deals with a theoretical analysis of a new power generation method driven by a low grade heat source. When the temperature of the low grade heat source exceeds the saturated temperature, it can heat the liquid into steam. If the steam is sealed and cooled in a container, it will lead to a negative pressure condition. The proposed power generation method utilizes the negative pressure condition in the sealed container, called as a condensator. When the condensator is connected to a liquid pool, the liquid will be pumped into it by the negative pressure condition. After the condensator is filled by liquid, the liquid flows back into the pool and drives the turbine to generate electricity. According to our analysis, for water, the head pressure of water pumped into the condensator could reach 9.5 m when the temperature of water in the pool is 25 °C, and the steam temperature is 105 °C. Theoretical thermal efficiency of this power generation system could reach 3.2% to 5.8% varying with the altitude of the condensator to the water level, ignoring steam leakage loss.

[1]Abbott, D., 2009. Hydrogen without tears: addressing the global energy crisis via a solar to hydrogen pathway. Proceedings of the IEEE, 97(12):1931-1934.

[2]Al-Kharabsheh, S., Goswami, D.Y., 2004. Theoretical analysis of a water desalination system using low grade solar heat. Journal of Solar Energy Engineering, 126(2):774-780.

[3]Anonymous, 2009. Low Grade Heat Conversion. Available from http://www-diva.eng.cam.ac.uk/energy/environmental/low_grade_heat.html [Accessed on June 1, 2011].

[4]Badr, O., O’callaghan, P.W., Probert, S.D., 1990. Rankine-cycle systems for harnessing power from low-grade energy-sources. Applied Energy, 36(4):263-292.

[5]Barna, I.F., Imre, A.R., Baranyai, G., Ézsöl, G., 2010. Experimental and theoretical study of steam condensation induced water hammer phenomena. Nuclear Engineering and Design, 240(1):146-150.

[6]Bell, M.A., 1981. Enhanced Compressed Air Storage Using Low Grade Thermal Energy. Third International Conference on Future Energy Concepts, p.77-80.

[7]Boyle, R., Greenwood, C., Hohler, A., Liebreich, M., Brien, V.S., Tyne, A., Usher, E., 2008. Global Trends in Sustainable Energy Investment: Analysis of Trends and Issues in the Financing of Renewable Energy and Energy Efficiency, UNEP/Earthprint.

[8]Ginell, W.S., McNichols, J.L., Cory, J.S., 1978. Low-grade thermal energy-conversion joule effect heat engines. Mechanical Engineering, 100(11):110-111.

[9]Ginell, W.S., McNichols, J.L., Cory, J.S., 1979. Nitinol heat engines for low-grade thermal-energy conversion. Mechanical Engineering, 101(5):28-33.

[10]Grew, K.E., Ibbs, T.L., 1952. Thermal Diffusion in Gases. Cambridge University Press, Cambridge.

[11]Holman, J.P., 2002. Heat Transfer. McGraw-Hill, New York.

[12]Hung, T.C., Shai, T.Y., Wang, S.K., 1997. A review of organic Rankine cycles (ORCs) for the recovery of low-grade waste heat. Energy, 22(7):661-667.

[13]Incropera, F.P., Dewitt, D.P., 1985. Introduction to Heat Transfer. John Wiley, New York.

[14]Li, J.M., Li, M.L., Li, Y.T., 2008. Strategies Analysis on Energy Shortage and Influence in China. Theory and Practice of Risk Analysis and Crisis Response, Proceedings, p.729-734.

[15]Li, Y.T., 1981. Nitinol Engine for Low Grade Heat. Patent No. 4302938, USA.

[16]Nag, P.K., 1981. Engineering Thermodynamics. McGraw-Hill, New Delhi.

[17]Pazdzior, A., 2010. Crisis and financial results of public companies from the energy industry in Poland. Rynek Energii, 1:80-84.

[18]Quadrelli, R., Peterson, S., 2007. The energy-climate challenge: Recent trends in CO₂ emissions from fuel combustion. Energy Policy, 35(11):5938-5952.

[19]Quickenden, T.I., Hindmarsh, K.M., Teoh, K.G., 2004. Experimental study of the minto engine—A heat engine for converting low grade heat to mechanical energy. Journal of Solar Energy Engineering-Transactions of the ASME, 126(1):661-667.

[20]Rolle, K.C., 2000. Heat and Mass Transfer. Upper Saddle River, Prentice-Hall, NJ.

[21]Ruhl, C., 2010. Global energy after the crisis prospects and priorities. Foreign Affairs, 89(2):63-64.

[22]Sargent & Lundy, 2003. Assessment of Parabolic Trough and Power Tower Solar Technology Cost and Performance Forecasts. SL-5641, Chicago.

[23]Schmidt, F.W., Willmott, A.J., 1981. Thermal Energy Storage and Regeneration. McGraw-Hill, New York.

[24]Wang, J.Q., Cao, W.B., 2009. Development Countermeasures of China’s Renewable Energy Industry under the Influence of Financial Crisis. Proceedings of the 3rd International Conference on Risk Management & Global E-Business, p.75-78.

[25]Wiser, R., Bolinger, M., Cappers, P., Margolis, R.., 2006. Letting the Sunshine in Solar Costs: an Empirical Investigation of Photovoltaic Cost Trends in California. Ernest Orlando Lawrence Berkeley National Laboratory, USA.